GeoSat Microwave 10KHz Ku-Band PLL Low Noise Block (LNB) | Model: GLBPLF110 View larger

Geosat Low Noise Block Dual PLL Ku-Band (10.7-12.75)

GLKU2LON

New

  • Input frequency 1 - 10.7 - 11.7 GHz
  • Input frequency 2 - 11.7 - 12.75 GHz
  • L.O (GHz), Switching - 9.75, 10.6
  • Input waveguide flange - WR-75
  • Power Supply - +12 to +24V DC

More details

Specifications:

Section Item Specification
Band 1 Input (GHz) 10.7  - 11.7
Output (MHz) 950 - 1950
L.O (GHz), Switching 9.75 @13 VDC / or 22KHz off
Band 2 Input (GHz) 11.7 - 12.75
Output (MHz) 1100 - 2150
L.O (GHz), Switching 10.6 @18 VDC / or 22KHz on
Specifications Noise figure (@+25℃) 1.0 dB max.
  Input VSWR 2.5 : 1 max.
Conversion gain 60 dB typ. (55dB min, 65dB max)
Output VSWR 2.5 : 1 max.
Gain flatness 5 dBp-p max.
Gain ripple (@ 40MHz) 1 dBp-p max
1dB gain compression point +5 dBm min.
  Output impedance 75, 50 ohms
Leakage (@ input port) -45 dBm max.
L.O stability (over temp.) +/- 25KHz max
Phase noise -70 dBc/Hz (@1KHz)
-80 dBc/Hz (@10KHz)
-95 dBc/Hz (@100KHz)
Image rejection 40 dBc min.
    Power supply +12 to +24V DC
Required current 350 mA max.
Operating temperature -40℃ to +60℃
Storage temperature -40℃ to +80℃
Relative humidity 0% to 95% RH
Input waveguide flange WR- 75
> IF output connector F-Type, N-Type female
Weight 400 g
     

Reviews

No customer comments for the moment.

Write a review

Geosat Low Noise Block Dual PLL Ku-Band (10.7-12.75)

Geosat Low Noise Block Dual PLL Ku-Band (10.7-12.75)

  • Input frequency 1 - 10.7 - 11.7 GHz
  • Input frequency 2 - 11.7 - 12.75 GHz
  • L.O (GHz), Switching - 9.75, 10.6
  • Input waveguide flange - WR-75
  • Power Supply - +12 to +24V DC

Write a review

Download